Fields marked * are required.
MYCOND equipment
1.1. These Warranty Terms (the “Terms”) set out the period, scope, procedure and conditions of the warranty for MYCOND-branded equipment that the Supplier ships to Authorised Distributors.
1.2. The warranty under these Terms is a business-to-business (B2B) warranty. The Supplier gives it only to the Authorised Distributor. It is not a warranty to end users, installers, dealers or any other third party, and no third party acquires any rights under these Terms.
1.3. Warranty obligations towards its own customers (dealers, installers, end users) are borne by the Distributor or the other person that sold the Equipment, under its own terms of sale and the law of the country of sale. Terms that the Distributor gives to its customers do not extend the Supplier’s obligations. Nothing in these Terms affects the statutory rights of consumers against the person who sold the Equipment to them.
1.4. These Terms form an integral part of every Distribution Agreement that refers to them. Where the Distribution Agreement expressly provides otherwise, the Distribution Agreement prevails.
1.5. The current version of the Terms is published at mycond.eu. The Supplier may amend the Terms by sending the new version to the Distributor’s e-mail address stated in the Distribution Agreement at least 30 (thirty) days before it takes effect. The new version applies to Equipment shipped after its effective date, and Sections 8–10 (submitting and reviewing Claims, supplying Spare Parts) apply to all Claims submitted after that date. If the Distributor does not accept the new version, it may terminate the Distribution Agreement by written notice given before the effective date, and the previous version then continues to apply to Equipment shipped to it.
1.6. These Terms do not limit any rights of the Distributor that cannot be limited or excluded by contract under mandatory provisions of applicable law.
3.1. The warranty is available only to a Distributor that:
3.2. Warranty obligations for a unit of Equipment are borne only by the Supplier that shipped it. The Brand Owner, the manufacturer and other MYCOND licensees are not parties to the warranty relationship under these Terms unless they have expressly agreed otherwise in writing.
3.3. The warranty covers only Equipment that the Distributor purchased directly from the Supplier. Claims concerning Equipment purchased from any other person are handled by the person that sold it. This Clause only allocates warranty responsibility and does not restrict the Distributor’s freedom to purchase or resell Equipment.
3.4. While the Distributor has overdue payments to the Supplier, the Supplier may suspend the review of Claims and the supply of Spare Parts. Claims submitted during the suspension are preserved and are reviewed once the overdue amounts have been paid.
3.5. After the Distribution Agreement expires or is terminated, these Terms continue to apply to Equipment shipped while it was in force, until the end of its Warranty Period, subject to Clause 3.4 and unless the Distribution Agreement provides otherwise.
4.1. The Warranty Period is 24 (twenty-four) months from the Shipment Date of the Equipment to the Distributor, unless a different period is set for specific Equipment in the Distribution Agreement, a specification or the Supplier’s written confirmation.
4.2. The Warranty Period does not depend on the date the Equipment is sold to the Distributor’s customer or on the installation or start-up date. Time in storage at the Distributor’s or a third party’s warehouse counts towards the Warranty Period, so the Distributor is advised to sell Equipment on a first-in, first-out basis.
4.3. Supplying a Spare Part or replacing Equipment does not extend or restart the Warranty Period. A Spare Part or replacement Equipment is covered until the end of the Warranty Period of the original Equipment.
4.4. Time spent reviewing a Claim, waiting for a Spare Part, or during a suspension under Clause 3.4 does not extend the Warranty Period.
4.5. The Claim must reach the Supplier before the Warranty Period ends. A later Claim is not reviewed, even if the Defect appeared earlier.
4.6. Spare Parts purchased by the Distributor for a fee (outside a Warranty Case) are warranted for 6 (six) months from the Shipment Date on these Terms.
4.7. The Supplier may introduce extended warranty programmes for certain groups of Equipment, for example subject to start-up or maintenance by an authorised service provider. Such programmes apply only under separate written terms of the Supplier.
5.1. Where the Supplier confirms a Warranty Case, it provides the Distributor, free of charge, with a Spare Part to replace the defective component.
5.2. Where, in the Supplier’s opinion, replacing the Spare Part is technically impossible or economically unreasonable, or the Spare Part is not available within a reasonable time, the Supplier provides new Equipment instead of the defective unit. This may be the same model or another model with no worse key characteristics, including a successor model if the model has been discontinued.
5.3. Where neither a Spare Part nor replacement Equipment is available, the Supplier may, at its discretion, issue a credit note for an amount not exceeding the price the Distributor paid for the defective Spare Part or unit of Equipment.
5.4. The Supplier alone chooses how the warranty is performed. The Distributor may not demand replacement Equipment instead of a Spare Part, a refund, a price reduction or termination of the contract for the batch.
5.5. The Supplier does not perform or reimburse:
5.6. Upon supplying a Spare Part, replacement Equipment or a credit note, the Supplier’s warranty obligations under the relevant Claim are deemed fully performed.
6.1. The warranty does not cover Defects and damage resulting from:
6.2. The warranty also does not cover:
6.3. Transport damage and incomplete delivery are not Warranty Cases. The Distributor inspects the Equipment on receipt and records any damage in the transport document (CMR). It notifies the Supplier of hidden damage in writing within 5 working days of receipt. Where the Distributor arranged the transport, the Distributor bears the risk of damage in transit.
6.4. The Supplier determines, by reviewing the Claim, whether a Defect results from a manufacturing fault or from the circumstances listed in Clauses 6.1–6.2. The burden of proving that a Defect is a manufacturing fault rests with the Distributor.
7.1. The warranty applies only if:
7.2. The Distributor shall:
7.3. If any condition of Clause 7.1 has not been met, or its fulfilment has not been documented, the Supplier may refuse warranty for the Equipment concerned, unless the Distributor shows that the failure did not cause or contribute to the Defect.
8.1. Every Claim must be submitted by the Distributor through the online form at mycond.eu/service (the Portal). The form must be completed in full, with correct data and the documents listed in Clauses 8.5–8.6. Only where this is technically impossible — the form does not work, or the support service has not replied to the e-mail address stated in the Claim within 3 working days of its submission — shall the Distributor send the fully completed claim file, in the Supplier’s form, to service@mycond.eu. Requests made by phone, messengers or social media, and requests from persons other than the Distributor, are not Claims.
8.2. A Claim must be submitted within 14 (fourteen) calendar days of the day the Defect was detected, and no later than the end of the Warranty Period. The day of detection is the day the customer first contacted the Distributor or its service partner or, if the Distributor detected the Defect itself, the day of that detection.
8.3. One Claim is submitted per unit of Equipment (one serial number).
8.4. Before submitting a Claim, the Distributor carries out diagnostics at its own cost, identifies the defective component and concludes whether the case is covered by the warranty. The Supplier does not perform on-site diagnostics.
8.5. The Claim contains:
8.6. The following are attached to the Claim:
8.7. A Claim without a complete set of data and documents is not reviewed. The review period starts on the day the complete set is received. If the Distributor does not provide the requested data within 30 calendar days, the Claim is closed without acceptance.
8.8. The Distributor is responsible for the accuracy of the data provided. Inaccurate data are grounds for refusal and, if a Spare Part has already been supplied, for invoicing it and its delivery.
8.9. The Distributor transfers customers’ personal data only to the extent necessary to review the Claim and ensures a lawful basis for such transfer (including under the GDPR and the UK GDPR).
9.1. On receipt, each Claim is given a registration number, to be quoted in all further correspondence.
9.2. The Supplier normally reviews a complete Claim within 10 working days. The period may be extended if a manufacturer’s opinion, an expert examination or the return of the defective part is needed. Review periods are indicative.
9.3. During the review, the Supplier may:
9.4. Following the review, the Supplier accepts the Warranty Case in full or in part, or rejects it. The decision is sent to the Distributor’s e-mail address stated in the Claim. On acceptance, the Supplier determines how the warranty is performed under Section 5.
9.5. Acceptance of a Warranty Case does not mean acceptance of any other claims, costs or losses of the Distributor or third parties.
9.6. If a Claim proves unjustified, the Distributor reimburses the Supplier for the costs of checking it, examination and transport.
9.7. The Supplier may, at its discretion, supply a Spare Part before the final decision, or free of charge as a goodwill gesture. This is not an acceptance of a Warranty Case and creates no future obligations. If, after the check, the case is found not to be covered, the Supplier may invoice the Spare Part and its delivery at the Distributor’s prices.
9.8. The Distributor may submit reasoned objections to the decision within 14 calendar days of receiving it, with new evidence. After the second review, any dispute is resolved as set out in the Distribution Agreement.
10.1. A Spare Part or replacement Equipment is made available at the Supplier’s warehouse. The Distributor chooses collection or courier delivery at its own expense. Shipment is possible only after the delivery or collection details are received.
10.2. Spare Parts in stock are normally prepared for shipment within 5 working days of the decision. Parts not in stock are ordered from the manufacturer, with an estimated lead time of up to 80 calendar days. Lead times are indicative; delays do not entitle the Distributor to compensation, a contractual penalty or termination.
10.3. If the Distributor does not collect the Spare Part or replacement Equipment within 60 calendar days of being notified that it is ready, the Supplier’s obligations under the Claim are deemed performed.
10.4. The Distributor keeps replaced parts or Equipment for at least 3 (three) months after the replacement is provided, labelled with the Claim number. At the Supplier’s request, the Distributor sends them within 14 calendar days to the address given by the Supplier. Storage and return costs are borne by the Distributor unless the Supplier decides otherwise.
10.5. If a requested defective part is not returned on time, the Supplier may invoice the Spare Part or Equipment supplied and its delivery at the Distributor’s prices, and the Distributor shall pay the invoice.
10.6. When replacing Equipment, the Supplier may require the defective Equipment to be returned complete beforehand, or disposed of according to its instructions with photographic proof.
10.7. Ownership of replaced parts or Equipment passes to the Supplier when the replacement is provided.
10.8. Spare Parts supplied under warranty are used only to remedy the Defect under the relevant Claim and are not for resale.
11.1. The Supplier does not accept or review warranty requests from end users, installers, dealers or other third parties, including requests submitted through the Portal. The Supplier refers such persons to the Distributor or other seller from whom the Equipment was purchased.
11.2. The Supplier may inform the Distributor of such a request and pass on the requester’s contact details to the extent permitted by data protection law. This creates no obligations of the Supplier towards the requester.
11.3. Technical advice given to a third party is for information only and is not an acceptance of a Warranty Case.
11.4. The Distributor shall provide its customers with the contact details of its own service for warranty requests and shall not refer them to the Supplier.
11.5. The Supplier provides the Distributor with reasonable technical support: advice, service documentation, error code tables and, where possible, training for the Distributor’s service technicians.
12.1. These Terms exhaustively define the Supplier’s obligations regarding the quality of the Equipment and the Distributor’s remedies. To the maximum extent permitted by applicable law, all other warranties, conditions, terms and liability for defects, whether express or implied by statute, common law, custom or otherwise, are excluded (including statutory liability for defects and, in the United Kingdom, the terms implied by sections 13 to 15 of the Sale of Goods Act 1979), as are remedies under the United Nations Convention on Contracts for the International Sale of Goods (Vienna, 1980) to the extent inconsistent with these Terms.
12.2. The Supplier is not liable for indirect or consequential losses: loss of profit, loss of revenue, downtime, property damage (including from water or condensate), or third-party claims, fines and penalties.
12.3. The Supplier’s aggregate liability under any one Claim shall not exceed the price paid by the Distributor for the relevant Spare Part or unit of Equipment.
12.4. The exclusions and limitations of liability in these Terms (including Sections 5 and 12) do not apply where liability cannot be excluded or limited under mandatory law, including liability for intent or fraud, for death or personal injury, product liability towards injured persons, and recourse rights of the Distributor under mandatory law where it has been held liable to a consumer.
12.5. Submitting a Claim does not entitle the Distributor to withhold or reduce payments for deliveries, or to set off counterclaims, without the Supplier’s written consent.
12.6. Governing law and dispute resolution are as set out in the Distribution Agreement.
12.7. These Terms take effect on the date of their publication at mycond.eu.